Repainting with Putty: Sanding + One coat of Primer + Putty for levelling if any + One coat of Primer + Two coats of paint

Repainting without Putty ( if base surface is of good quality ): Sanding + One coat of primer + Two coats of paint

Painting on new surface: Acrylic Primer/Putty/POP + Sanding + Putty if required + Primer + Two coat of paint

Covering of entire furniture and flooring with plastic sheets.

Pack all the switches & hardware with masking tapes.

After completion of work, perform cleaning with vacuum cleaner and wet moping.

Option 1: Based on per sqft of paint area, inclusive of material & labour. Rate shall vary with type of paint, colours, status of existing surface etc.

Option 2: Lumpsum as calculated based on requirements, type of paint material, colours etc.

We provide colour consulting service through catalogues and softwares of the paint manufacturer companies. Cost of unapproved samples to be borne by the customers.

We are not associated with any specific brands as such. Customers are free to choose their brand of preference. We advise customers to select branded materials of Asian Paints/ Berger/ ICI Dulux/ Indigo. We also advise customers on type of material based on the type of surface to be painted.

Yes, we provide six months warranty for the service rendered. The material warranty shall be as per manufacturer’s recommendation . Service warranty covers for any fade in shade, peeling out of the paint without any external factors such as water leakage, air cracks or Dampness.

Survey: Free of cost

On confirmation of the proposal: 20% of the contract value

On supply of all the required paint material: 40% of the contract value

On completion and handing over: Balance 40% of the contract value

We accept payments in Cash, UPI and Bank Transfer.

GST shall be extra.

POP is made of Gypsum while Putty is made of White cement & polymers. POP can be done upto the thickness of 25 mm and use mainly to level the undulation of walls. Putty can be done upto the thickness of 1.5 mm, it is mainly use to smoothen the wall surfaces.

Cement wall putty is often used on masonry surfaces and when there are large gaps in between joints due to poor construction practices. Acrylic wall putty is often more expensive but it lasts longer than cement types because it resists water damage better. For Luxury & Luxury plus paints, Acrylic putty is a better option.

Primer looks a lot like paint, but has a higher concentration of solids plus an adhesive binder in it. It essentially seals the surface and provides a smooth and clean area for paint to adhere. In some ways, it’s more of a glue or sealant than a paint.

Usually two coats of paints are enough but more coats may be required for darker shades. Proper application of primer is also helpful in optimizing the number of paint coats.

No, with sanding & putty,  upto 1.5 mm thickness of undulation be adjusted. Beyond it, POP application is needed.

Minor wetness can be hide through water proof putty and primer, ideally source of seepage to be rectified to close to the seepage issue.

Lacquer, Melamine, PU, Polyester, Duco, Enamel, Water based emulsion paints can also be done.

The Melamine and Lacquer is exactly the same product as the non-aerosol version, with the same performance properties. The Acrylic Gloss and Acrylic Satin Lacquers are slightly different as we are able to use different resins in them.

They function similarly and the differences are mainly in the duration and resistance of the coatings. PU Polish provides more resistance and durability to the wooden surfaces but definitely costlier than Melamine. For Exterior purpose, Melamine will not suit the purpose as it has very limited resistance against water and sun.

Duco paint is used on wooden and metal surfaces as it increases the life of the furniture by being resistant to many aspects that ruin metal and wooden furniture.

It can be applied on interior surfaces. It can’t be applied on external surface as it gets dissolved in water.

Low VOC paints are those that contain less “Volatile Organic Compounds” (VOC) or VOC Solvents than traditional coatings. These paints shall generate lesser harmful fumes hence better for health.

A painter’s total estimated cost is based on the estimated hours they will take to complete the work, plus a number of factors that are subject to change, taking into account:

Location

Season

Type of work (interior or exterior)

Type of existing walls

Colour selection

Volume of work

Restriction in timing/ availability of areas

As part of the service, we use mechanized tools to ensure superior finish. We conduct scientific site evaluation through moisture meters and take accurate measurement through laser-based digital distance meters. Covering and masking of furniture is done through masking films. Superior sanding is done through electric sanders and dust extraction is carried out by vacuum cleaners. We also use the Ultra Hand Held Sprayer to get a uniform paint finish, quicker. All this ensures that home painting is a hassle-free process.